Floor-Care Maintenance

By Robert Kravitz and Michael Schaffer

Hard-surface floors in all types of facilities, including park and recreation centers, make a big statement. Very often they not only are the initial impression visitors have of a facility, but leave a lasting impression as well.

In years past, when budgets were ample and labor costs were lower, park administrators could spend money to keep the floors glossy and in tip-top condition. However, those days are but a memory now, as some centers struggle just to keep their doors open, let alone a shine on the floor.

For a facility, floors are definitely an investment, often a large one, and the better maintained they are, the longer they will last–allowing for cost savings in the long run. Fortunately, through advances in floor-care equipment technologies, more thorough training and proper workloading and scheduling, floors can be kept looking their best and have a longer lifespan–and it can all be done without costing “an arm and a leg.”

Two Sides Of Floor Care

To understand how this can be done, we must realize there are two sides to floor care. The first involves the type of flooring installed and the conditions it’s subjected to. The second is the program developed to clean and maintain the floors.

There are literally hundreds of different hard-surface floor types and flooring products available for installation in a residential or commercial facility. However, they generally fall into six key categories:

1. Concrete–Polished, coated, stained, dyed and dry shake-floors. It has become more popular in recent years because it is viewed as environmentally responsible and also relatively inexpensive.

2. Resilient–Vinyl composition tile (VCT) and sheet vinyl. Probably the most common hard-surface material.

Stone–Terrazzo (common in park and recreation facilities) as well as marble, granite, travertine and limestone.

3. Wood–Solid, laminated and engineered wood materials.

4. Clay and masonry–Ceramic, porcelain, brick and quarry-type floors.

5. Specialty–Bamboo and cork floors. Usually refers to a new breed of flooring that is especially environmentally responsible.

In addition to the type of hard-surface floor installed, the conditions the floor is subjected to must also be considered, including:

1. Traffic–The number of people who walk across the floor on a daily/monthly basis and the equipment or materials regularly rolled or dragged across the floor.

2. Climate and environment–Local weather trends and conditions affect what can potentially get tracked into a facility (snow, rain, ice melt, etc.). This is an even greater consideration for park and recreation centers that may be surrounded by playground areas, as well as landscaped and open-area grounds.

3. Size–The square footage of the area to be maintained.

4. Congestion–Facilities frequently have physical obstacles, often referred to as congestion, that hinder proper maintenance. A recent survey of cleaning technicians by a floor-care equipment manufacturer found that facility congestion is a technician’s biggest challenge.

Often, there is little managers can do about the floors installed in their facilities. The floors were likely installed for aesthetic reasons without any consideration or understanding of “real-world” maintenance issues or requirements.

Additionally, the use of the floor the amount of traffic, environmental issues, and other factors are often beyond the control of managers. Making matters worse, these conditions can change. Certain floor areas of a facility may receive more use and traffic over time than what was originally planned for when budgeting for maintenance costs.

Facing Maintenance Challenges

With all this information in hand, a manager can begin developing and implementing a comprehensive, cost-effective floor-care program, which is the second part of floor care. However, success depends on the manager’s knowledge of floor-care equipment and products.

For instance, many popular hard-surface floors installed today have uneven surfaces. The problem this causes is that soiling can develop in crevices and lower areas of the floor, which can be labor-intensive and costly to clean with a typical rotary machine. An astute manager will know that cylindrical brush technology–floor machines that use brushes instead of pads to clean, strip, and scrub floors–can reach deep into these areas and remove soiling with little or no added time, effort or labor costs.

Trends In Floor Care

Page 1 of 2 | Next page

Related posts:

  1. What Image Does Your Maintenance Facility Portray?
  2. Get A Grip On Rubber Flooring
  3. Floors For Foodservice
  4. A More Functional Floor Plan
  5. A Return To Manual Maintenance
  • Camp Business
  • Insider Access
  • LA Directory
  • LAB Top Stories
  • Landscape Architect Business
  • Parks and Rec Business
  • Uncategorized