Blast Off And Paint!

After 40 layers of paint and bumpy patch jobs, the swimming pool is looking old and tired. A job that used to entail touch-up paint and small fixes has become a battle of putting Band-Aids on chunks of uneven, peeling potholes in the concrete walls. It’s time for an overhaul.

So whom do you call? Sandblasters!

“’Sandblasting’ is a misnomer,” says Al Panariello, sales coordinator for All Pool Demolition in Midland, N.J. “Sand was pretty much outlawed in New Jersey 20-25 years ago.

Blasting Off The Past

All Pool Demolition tears down, rebuilds, and refurbishes pools. When a pool needs years of paint accumulation removed, All Pool Demolition comes in and “sandblasts” it clean. Al says sand has been replaced with a variety of substances, but “you’re not going to get paint off concrete with corncobs, baking soda or bicarbonate of soda.” These and other products, like black beauty, a by-product of coal production, are sometimes used in various “sandblasting” operations. Al finds black beauty slightly cheaper, but not worth the savings because it is “dirty.”

Dry sandblasting is illegal in All Pool Demolition’s hometown, so the company uses Ebony Grit Media, a copper slag that is sharp, angular and hard. “We’ve taken paint off pools (with Ebony sandblasting) that have been painted 40 times. It’s still called sandblasting, but just not with sand.” Their Web site–poolremoval.com—states, “Our objective is to get all the surface paint off and 90 percent of the imbedded paint. We have never had a complaint!”

Getting Started

To prepare for sandblasting, a pool must first be drained, but it doesn’t have to be dry. As sales coordinator for All Pool Demolition, Al is in charge of quoting jobs. He says that if a pool has not been drained already, it will add time and money to the job. His advice for those looking for companies to sandblast a pool can be summed up in few words: “Keep the bid simple.” If it is too complex, he warns, you won’t get many bidders. He also advises finding a company that protects the surrounding area and cleans up after themselves. “We tarp everything,” explains Al, “so any of the stuff that comes out goes on the tarps and not on the flowers or bushes or grass.”

To start the process, bags of ebony are placed in a sandblast pot inside the pool. The water and ebony mix blasts out of a hose at a rate of 125 psi, almost like that of a fire hose. The sharp, hard ebony hits the pool with a mighty force, washing away years of paint and patching.

Selecting The Proper Paint

Al says that, although All Pool Demolition is highly efficient in painting, most of the parks elect to repair and paint the newly scrubbed pool themselves. He recommends using epoxy paint, specifically Ramuc Pool and Deck Paint.

Pam Keeler, division manager for Ramuc in Pittsburgh, shares Al’s opinion in using epoxy for pool painting. “I agree with him totally. Epoxy is the best way to go. High-build epoxies are made to last longer because they go on thicker. They can last eight years or longer.” In New Jersey, using a product that is VOC-compliant is important. Pam explains, “They can’t use certain products, but he [Al] can use our epoxies. They’ve been on the market a very long time and they just last longer than any other product out there underwater. We make an acrylic, and it’s a nice product, but it won’t last anywhere near as long as epoxy.”

Here is Pam’s step-by-step lesson on how to paint your sandblasted pool.

Painting A Swimming Pool

The most important part of a paint job is the preparation. There are no shortcuts! Acrylic pool paints can be used on a damp surface, and don’t require as long a dry time before painting. Consult the label of the paint for application directions.

· Determine the type of pool paint that is in the pool. You cannot paint a pool that has epoxy paint with rubber-based paint or vice versa. You can use acrylic paint on any surface.

· Drain any water from the swimming pool and remove all debris. Be sure to remove any hydrostatic relief plugs.

· Scrape all old, loose pool paint off the pool surface. A high-pressure power washer will help.

· If there are any cracks in the swimming pool shell, they must be cut out with a diamond blade saw or grinder. Cut the cracks one-quarter inch deep.

· Chip out any divots or loose cement. Caulk the cracks, and patch any large chips or divots with hydraulic cement.

Page 1 of 2 | Next page

Related posts:

  1. Blast Off And Paint!
  2. Fluid In Motion
  3. Aquatics Workshops
  4. Everything H2O Q&A
  5. Manual or Robotic?
  • Columns
  • Departments