Overuse And Neglect

Much press is given to golf courses–the turf, the landscaping, the architecture of the clubhouse, even the layout of the pro shop. And those are all essential parts of the experience for players. But, just for this article, let’s turn our attention to a part of the public-golf facility most people don’t usually think about–the paths that wind their way through the course.

Make sure your golf course is ready for the onslaught of these guys!

Admittedly, this is not a sexy topic. Everyone would rather hear about the water hazards, sand traps, even the putting greens. But no single aspect of a course gets more use than the cart paths, and no single aspect gets more neglect. Why? Because paths are just … there.

Whether a facility sees more use from golfers who use push carts to move their clubs along the fairway or whether it has gas- or electric-powered carts available, the paths are going to get plenty of use, and they must be kept in good repair.

First Things First

The purpose of a golf cart path is to minimize wear to the course. A wide, smooth, well-constructed path encourages golfers to stay there, and off the fairway. While over the years, cart paths have been constructed in a variety of widths, these days there are more stringent guidelines.

According to information on the U.S. Golf Association website, elements of the Americans with Disabilities Act Accessibility Guidelines (ADAAG) do pertain to buildings, golf courses, and other recreational facilities. They suggest unobstructed pathways of at least 4 feet wide that connect all areas of the golf facility. (Complete explanations are available at www.ada.gov).

A 4-foot-wide path through the course may be the ADA requirement, but many facilities opt for a much wider thoroughfare. According to Dave Oatis, director of the Northeast Region-Green Section of the U.S. Golf Association, “Installing paths less than 8 feet wide leads to wear along the edges and more rapid deterioration of the path. Paths must be even wider in areas where carts congregate or pass one another, and in areas heavily used by the maintenance staff. Widths in these areas should be 12 feet or more.”

A golf-course architect can supply recommendations that work with a given area’s playing population, topography, and more. (However, in many cases, the width of the path is determined at construction time, and that width is dictated by the budget for the project, so what may be the ideal may not come into play at all.)

On The Surface

Golf cart paths can be loosely grouped into two categories:

• Stable pavement (asphalt or concrete)

• Loose, granular material (gravel, crusher run, mulch, shredded tires, etc.).

Some might also be made of brick and other materials, but more popular by far are the first examples.

No choice is perfect; each has its advantages and disadvantages. Stable pavements overall tend to require little daily maintenance, but isolated problems in or even reconstruction of sections of paths made of granular material tend to be more easily and less expensively fixed.

Staying In Shape

Many forces influence how much maintenance goes into paths. Budget and manpower are perhaps the two most influential factors. Public courses often suffer from overuse and little downtime, which affects the paths as well.

The most essential aspect of any path maintenance plan is supervision. Travel your paths on a regular basis and keep an eye out for problems that may be developing.

Page 1 of 2 | Next page

Related posts:

  1. Overuse And Neglect
  2. Get A Grip On Golf-Course Design
  3. Blending Beautifully
  4. A Visionary Masterpiece
  5. Disc-Golf Course Design
  • Camp Business
  • Insider Access
  • LA Directory
  • LAB Top Stories
  • Landscape Architect Business
  • Parks and Rec Business
  • Uncategorized